In Resonate, there are 3 microphone/signals groups. These are as follows:
SIGNAL NAME | UI SHORT NAME | MICROPHONE/SIGNALS GROUP |
MIX 1 | MIX 1 | A |
MIX 2 | MIX 2 | B |
CLOSE | CLOSE | C |
STEREO MID | MIDS | C |
TREE | TREE | C |
AMBIENT | AMB | C |
CONTACT | CONTACT | C |
BOUNDARY | BNDRY | C |
WATER TANK | WATER | C |
REDUX | REDUX | C |
WAVE | WAVE | C |
GRAINS | GRAINS | C |
VINTAGE | VINTAGE | C |
DGRADE | DGRADE | C |
A group will become active when it has all its signals enabled.
You can tell which are enabled by looking at the active ROM toggles below each signal.
If you then turn up any signal from a different Mic Group, for example WATER from group C, it will automatically disable all signals from an active group.
This setting can be turned off under the Global Plugin Settings > Interface. Which is found in the top right corner cog menu of the plugin.
